4.1155-freebsd-126-freebsd-12freebsd-9.3
Last change
on this file since 8d4bab3 was
f5a38ad,
checked in by Sebastian Huber <sebastian.huber@…>, on 10/08/13 at 10:52:30
|
Simplify config.inc and use new reference BSP
Use arm/realview_pbx_a9_qemu as the new reference BSP. This BSP offeres
NULL pointer read/write protection and runs on the Qemu simulator. With
this BSP it is possible to run network tests which use a virtual network
based on TAP devices.
|
-
Property mode set to
100644
|
File size:
415 bytes
|
Rev | Line | |
---|
[f5a38ad] | 1 | # Mandatory: Select your BSP and installation prefix |
---|
| 2 | TARGET = arm-rtems4.11 |
---|
| 3 | BSP = realview_pbx_a9_qemu |
---|
| 4 | PREFIX = /opt/rtems-4.11 |
---|
| 5 | |
---|
| 6 | # Optional: Separate installation base directory |
---|
| 7 | INSTALL_BASE = $(PREFIX) |
---|
| 8 | |
---|
| 9 | # Optional: Network test configuration |
---|
[e599318] | 10 | TEST_RUNNER = $(BSP) |
---|
[6ab78d6] | 11 | NET_CFG_SELF_IP = 10.0.2.1 |
---|
| 12 | NET_CFG_NETMASK = 255.255.0.0 |
---|
| 13 | NET_CFG_PEER_IP = 192.168.100.11 |
---|
| 14 | NET_CFG_GATEWAY_IP = 192.168.100.11 |
---|
| 15 | NET_TAP_INTERFACE = tap0 |
---|
Note: See
TracBrowser
for help on using the repository browser.