source: rtems-docs/user/start/releases.rst @ 27bcdfb

4.115am
Last change on this file since 27bcdfb was 27bcdfb, checked in by Chris Johns <chrisj@…>, on 03/22/16 at 01:54:39

Add a basics section to Getting Started. Rearrange the content.

  • Property mode set to 100644
File size: 18.7 KB
Line 
1.. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org>
2.. comment: All rights reserved.
3
4.. _released-version:
5
6Released Version
7================
8.. index:: tarball
9.. index:: release
10
11RTEMS releases provide a stable version of the kernel for the supported
12architectures. RTEMS maintaines the current and previous releases. Support for
13older releases is provided using the RTEMS support channels.
14
15Please read :ref:`development-hosts` before continuing.
16
17The following procedure assumes you have installed and configured your host
18operating. It also assumes you have installed any dependent packages needed
19when building the tools and the kernel.
20
21You need to select a location to build and install the RTEMS Tool chain and
22RTEMS. Make sure there is plenty of disk space and a fast disk is
23recommended. Our procedure will document building and installing the tools in a
24home directory called :file:`/opt/rtems`. This path will require root
25access. If you are working on a machine you do not have root access to you can
26use a home directory, :ref:`development-version` has more details about
27this. If building on Windows use :file:`/c/opt/rtems` to keep the top level
28paths as sohrt as possible. :ref:`microsoft-windows-installation` provides more
29detail about path lengths on Windows.
30
31The location used to install the tools and kernel is called the `prefix`. It is
32best to have a `prefix` for each different version of RTEMS you are using. If
33you are using RTEMS 4.11 in production it is not a good to install a
34development version of 4.12 over the top. A separate `prefix` for each version
35avoids this.
36
37Releases download all source packages from the RTEMS FTP server. Hosting all
38the source on the RTEMS FTP server ensures the source is present for the like
39of the release on the RTEMS FTP server. If there is a problem accessing the
40RTEMS FTP the RSB will fall back to the packages home site.
41
42.. note:: **Control the RTEMS Kernel Build**
43
44   The RTEMS kernel is built by default for releases. To not build the RTEMS
45   kernel add the ``--without-rtems`` option to the RSB command line.
46
47   By default all the BSPs for an architecture are built. If you only wish to
48   have a specific BSP build you can specify the BSP list by providing to the
49   RSB the option ``--with-rtemsbsp``. For example to build two BSPs for the
50   SPARC architecture you can supply ``--with-rtemsbsp="erc32 sis"``.
51
52This procedure will build a SPARC tool chain.
53
54RTEMS Tools Chain
55-----------------
56
57Set up a suitable workspace to build the release in. On Unix:
58
59.. code-block:: shell
60
61 $ cd
62 $ mkdir -p development/rtems/releases
63 $ cd development/rtems/releases
64
65If building on Windows:
66
67.. code-block:: shell
68
69 $ cd /c
70 $ mkdir -p opt/rtems
71 $ cd opt/rtems
72
73**Note** the paths on Windows will be different to those shown.
74
75Download the RTEMS Source Builder (RSB) from the RTEMS FTP server:
76
77.. code-block:: shell
78
79 $ wget https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz
80 --2016-03-21 10:50:04-- https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz
81 Resolving ftp.rtems.org (ftp.rtems.org)... 140.211.10.151
82 Connecting to ftp.rtems.org (ftp.rtems.org)|140.211.10.151|:443... connected.
83 HTTP request sent, awaiting response... 200 OK
84 Length: 967056 (944K) [application/x-xz]
85 Saving to: 'rtems-source-builder-4.11.0.tar.xz'
86
87 rtems-source-builder-4.1 100%[====================================>] 944.39K 206KB/s   in 5.5s
88
89 2016-03-21 10:50:11 (173 KB/s) - 'rtems-source-builder-4.11.0.tar.xz' saved [967056/967056]
90
91On Unix unpack the RSB release tar file using:
92
93.. code-block:: shell
94
95 $ tar Jxf rtems-source-builder-4.11.0.tar.xz
96 $ cd rtems-source-builder-4.11.0/rtems/
97
98On Windows you need to shorten the path (See :ref:`windows-path-length`) after
99you have unpacked the tar file:
100
101.. code-block:: shell
102
103 $ tar Jxf rtems-source-builder-4.11.0.tar.xz
104 $ mv rtems-source-builder-4.11.0 4.110
105 $ cd 4.11.0
106
107Build a tool chain for the SPARC architecure. We are using the SPARC
108architecture in our example because GDB has a good simulator that lets us run
109and test the samples RTEMS builds by default
110
111If building on Windows add ``--jobs=none`` to avoid GNU make issues on Windows.
112
113.. code-block:: shell
114
115 $ ../source-builder/sb-set-builder \
116     --prefix=/opt/rtems/4.11 4.11/rtems-sparc
117 Build Set: 4.11/rtems-sparc
118 Build Set: 4.11/rtems-autotools.bset
119 Build Set: 4.11/rtems-autotools-internal.bset
120 config: tools/rtems-autoconf-2.69-1.cfg
121 package: autoconf-2.69-x86_64-freebsd10.1-1
122 Creating source directory: sources
123 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz
124 downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%)
125 building: autoconf-2.69-x86_64-freebsd10.1-1
126 config: tools/rtems-automake-1.12.6-1.cfg
127 package: automake-1.12.6-x86_64-freebsd10.1-1
128 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz
129 downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%)
130 Creating source directory: patches
131 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff
132 downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%)
133 building: automake-1.12.6-x86_64-freebsd10.1-1
134 cleaning: autoconf-2.69-x86_64-freebsd10.1-1
135 cleaning: automake-1.12.6-x86_64-freebsd10.1-1
136 Build Set: Time 0:00:32.749337
137 Build Set: 4.11/rtems-autotools-base.bset
138 config: tools/rtems-autoconf-2.69-1.cfg
139 package: autoconf-2.69-x86_64-freebsd10.1-1
140 building: autoconf-2.69-x86_64-freebsd10.1-1
141 reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.txt
142 reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.xml
143 config: tools/rtems-automake-1.12.6-1.cfg
144 package: automake-1.12.6-x86_64-freebsd10.1-1
145 building: automake-1.12.6-x86_64-freebsd10.1-1
146 reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.txt
147 reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.xml
148 installing: autoconf-2.69-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
149 installing: automake-1.12.6-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
150 cleaning: autoconf-2.69-x86_64-freebsd10.1-1
151 cleaning: automake-1.12.6-x86_64-freebsd10.1-1
152 Build Set: Time 0:00:15.619219
153 Build Set: Time 0:00:48.371085
154 config: devel/expat-2.1.0-1.cfg
155 package: expat-2.1.0-x86_64-freebsd10.1-1
156 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz
157 downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%)
158 building: expat-2.1.0-x86_64-freebsd10.1-1
159 reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.txt
160 reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.xml
161 config: tools/rtems-binutils-2.26-1.cfg
162 package: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
163 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2
164 downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%)
165 building: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
166 reporting: tools/rtems-binutils-2.26-1.cfg ->
167 sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.txt
168 reporting: tools/rtems-binutils-2.26-1.cfg ->
169 sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.xml
170 config: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg
171 package: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
172 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gcc-4.9.3.tar.bz2 -> sources/gcc-4.9.3.tar.bz2
173 downloading: sources/gcc-4.9.3.tar.bz2 - 85.8MB of 85.8MB (100%)
174 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/newlib-2.2.0.20150423.tar.gz -> sources/newlib-2.2.0.20150423.tar.gz
175 downloading: sources/newlib-2.2.0.20150423.tar.gz - 16.7MB of 16.7MB (100%)
176 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpfr-3.0.1.tar.bz2 -> sources/mpfr-3.0.1.tar.bz2
177 downloading: sources/mpfr-3.0.1.tar.bz2 - 1.1MB of 1.1MB (100%)
178 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpc-0.8.2.tar.gz -> sources/mpc-0.8.2.tar.gz
179 downloading: sources/mpc-0.8.2.tar.gz - 535.5kB of 535.5kB (100%)
180 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gmp-5.0.5.tar.bz2 -> sources/gmp-5.0.5.tar.bz2
181 downloading: sources/gmp-5.0.5.tar.bz2 - 2.0MB of 2.0MB (100%)
182 building: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
183 reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
184 sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.txt
185 reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
186 sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.xml
187 config: tools/rtems-gdb-7.9-1.cfg
188 package: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
189 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz
190 downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%)
191 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch -> patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch
192 downloading: patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch - 1.9kB of 1.9kB (100%)
193 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch -> patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch
194 downloading: patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch - 827.0 bytes of 827.0 bytes (100%)
195 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch -> patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch
196 downloading: patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch - 2.6kB of 2.6kB (100%)
197 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch -> patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch
198 downloading: patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch - 4.9kB of 4.9kB (100%)
199 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch -> patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch
200 downloading: patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch - 871.0 bytes of 871.0 bytes (100%)
201 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch -> patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch
202 downloading: patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch - 5.6kB of 5.6kB (100%)
203 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch -> patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch
204 downloading: patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch - 1.0kB of 1.0kB (100%)
205 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch -> patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch
206 downloading: patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch - 3.6kB of 3.6kB (100%)
207 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch -> patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch
208 downloading: patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch - 1.9kB of 1.9kB (100%)
209 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch -> patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch
210 downloading: patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch - 16.0kB of 16.0kB (100%)
211 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch -> patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch
212 downloading: patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch - 14.8kB of 14.8kB (100%)
213 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch -> patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch
214 downloading: patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch - 3.8kB of 3.8kB (100%)
215 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0013-sim-erc32-Fix-a-few-compiler-warnings.patch-> patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch
216 downloading: patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch - 2.2kB of 2.2kB (100%)
217 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch -> patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch
218 downloading: patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch - 9.2kB of 9.2kB (100%)
219 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch -> patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch
220 downloading: patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch - 22.9kB of 22.9kB (100%)
221 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch -> patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch
222 downloading: patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch - 1.5kB of 1.5kB (100%)
223 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch -> patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch
224 downloading: patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch - 5.8kB of 5.8kB (100%)
225 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch -> patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch
226 downloading: patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch - 66.7kB of 66.7kB (100%)
227 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch -> patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch
228 downloading: patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch - 26.1kB of 26.1kB (100%)
229 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0020-sim-erc32-Updated-documentation.patch -> patches/0020-sim-erc32-Updated-documentation.patch
230 downloading: patches/0020-sim-erc32-Updated-documentation.patch - 16.1kB of 16.1kB (100%)
231 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0021-sim-erc32-Add-data-watchpoint-support.patch -> patches/0021-sim-erc32-Add-data-watchpoint-support.patch
232 downloading: patches/0021-sim-erc32-Add-data-watchpoint-support.patch - 10.1kB of 10.1kB (100%)
233 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch -> patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch
234 downloading: patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch - 25.5kB of 25.5kB (100%)
235 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch -> patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch
236 downloading: patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch - 1.3kB of 1.3kB (100%)
237 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff
238 downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%)
239 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff
240 downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%)
241 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/patch-gdb-python-python-config.py -> patches/patch-gdb-python-python-config.py
242 downloading: patches/patch-gdb-python-python-config.py - 449.0 bytes of 449.0 bytes (100%)
243 building: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
244 reporting: tools/rtems-gdb-7.9-1.cfg ->
245 sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.txt
246 reporting: tools/rtems-gdb-7.9-1.cfg ->
247 sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.xml
248 config: tools/rtems-tools-4.11-1.cfg
249 package: rtems-tools-4.11.0-1
250 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-tools-4.11.0.tar.xz -> sources/rtems-tools-4.11.0.tar.xz
251 downloading: sources/rtems-tools-4.11.0.tar.xz - 1.6MB of 1.6MB (100%)
252 building: rtems-tools-4.11.0-1
253 reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.txt
254 reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.xml
255 config: tools/rtems-kernel-4.11.cfg
256 package: sparc-rtems4.11-kernel-4.11.0-1
257 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-4.11.0.tar.xz -> sources/rtems-4.11.0.tar.xz
258 downloading: sources/rtems-4.11.0.tar.xz - 9.3MB of 9.3MB (100%)
259 building: sparc-rtems4.11-kernel-4.11.0-1
260 reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.txt
261 reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.xml
262 installing: expat-2.1.0-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
263 installing: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
264 installing: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
265 installing: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
266 installing: rtems-tools-4.11.0-1 -> /opt/work/rtems/4.11.0
267 installing: sparc-rtems4.11-kernel-4.11.0-1 -> /opt/work/rtems/4.11.0
268 cleaning: expat-2.1.0-x86_64-freebsd10.1-1
269 cleaning: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
270 cleaning: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
271 cleaning: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
272 cleaning: rtems-tools-4.11.0-1
273 cleaning: sparc-rtems4.11-kernel-4.11.0-1
274 Build Set: Time 0:19:15.713662
Note: See TracBrowser for help on using the repository browser.