source: rtems-docs/user/start/releases.rst @ 2151927

4.115am
Last change on this file since 2151927 was 2151927, checked in by Chris Johns <chrisj@…>, on 03/22/16 at 02:42:02

Corrections.

  • Property mode set to 100644
File size: 18.7 KB
Line 
1.. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org>
2.. comment: All rights reserved.
3
4.. _released-version:
5
6Released Version
7================
8.. index:: tarball
9.. index:: release
10
11RTEMS releases provide a stable version of the kernel for the supported
12architectures. RTEMS maintaines the current and previous releases. Support for
13older releases is provided using the RTEMS support channels.
14
15Please read :ref:`development-hosts` before continuing.
16
17The following procedure assumes you have installed and configured your host
18operating. It also assumes you have installed any dependent packages needed
19when building the tools and the kernel.
20
21You need to select a location to build and install the RTEMS Tool chain and
22RTEMS. Make sure there is plenty of disk space and a fast disk is
23recommended. Our procedure will document building and installing the tools in a
24home directory called :file:`/opt/rtems`. This path will require root
25access. If you are working on a machine you do not have root access to you can
26use a home directory, :ref:`development-version` has more details about
27this. If building on Windows use :file:`/c/opt/rtems` to keep the top level
28paths as sohrt as possible. :ref:`microsoft-windows-installation` provides more
29detail about path lengths on Windows.
30
31The location used to install the tools and kernel is called the `prefix`. It is
32best to have a `prefix` for each different version of RTEMS you are using. If
33you are using RTEMS 4.11 in production it is not a good to install a
34development version of 4.12 over the top. A separate `prefix` for each version
35avoids this.
36
37Releases download all source packages from the RTEMS FTP server. Hosting all
38the source on the RTEMS FTP server ensures the source is present for the like
39of the release on the RTEMS FTP server. If there is a problem accessing the
40RTEMS FTP the RSB will fall back to the packages home site.
41
42.. note:: **Controlling the RTEMS Kernel Build**
43
44   The RTEMS kernel is built by default for releases. To not build the RTEMS
45   kernel add the ``--without-rtems`` option to the RSB command line.
46
47   By default all the BSPs for an architecture are built. If you only wish to
48   have a specific BSP build you can specify the BSP list by providing to the
49   RSB the option ``--with-rtemsbsp``. For example to build two BSPs for the
50   SPARC architecture you can supply ``--with-rtemsbsp="erc32 sis"``.
51
52This procedure will build a SPARC tool chain.
53
54RTEMS Tools Chain
55-----------------
56
57Set up a suitable workspace to build the release in. On Unix:
58
59.. code-block:: shell
60
61 $ cd
62 $ mkdir -p development/rtems/releases
63 $ cd development/rtems/releases
64
65If building on Windows:
66
67.. code-block:: shell
68
69 $ cd /c
70 $ mkdir -p opt/rtems
71 $ cd opt/rtems
72
73**Note** the paths on Windows will be different to those shown.
74
75Download the RTEMS Source Builder (RSB) from the RTEMS FTP server:
76
77.. code-block:: shell
78
79 $ wget https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz
80 --2016-03-21 10:50:04-- https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz
81 Resolving ftp.rtems.org (ftp.rtems.org)... 140.211.10.151
82 Connecting to ftp.rtems.org (ftp.rtems.org)|140.211.10.151|:443... connected.
83 HTTP request sent, awaiting response... 200 OK
84 Length: 967056 (944K) [application/x-xz]
85 Saving to: 'rtems-source-builder-4.11.0.tar.xz'
86
87 rtems-source-builder-4.1 100%[====================================>] 944.39K 206KB/s   in 5.5s
88
89 2016-03-21 10:50:11 (173 KB/s) - 'rtems-source-builder-4.11.0.tar.xz' saved [967056/967056]
90
91On Unix unpack the RSB release tar file using:
92
93.. code-block:: shell
94
95 $ tar Jxf rtems-source-builder-4.11.0.tar.xz
96 $ cd rtems-source-builder-4.11.0/rtems/
97
98On Windows you need to shorten the path (See :ref:`windows-path-length`) after
99you have unpacked the tar file:
100
101.. code-block:: shell
102
103 $ tar Jxf rtems-source-builder-4.11.0.tar.xz
104 $ mv rtems-source-builder-4.11.0 4.110
105 $ cd 4.11.0
106
107Build a tool chain for the SPARC architecure. We are using the SPARC
108architecture in our example because GDB has a good simulator that lets us run
109and test the samples RTEMS builds by default
110
111If building on Windows add ``--jobs=none`` to avoid GNU make issues on Windows
112discussed in :ref:`msys2_parallel_builds`.
113
114.. code-block:: shell
115
116 $ ../source-builder/sb-set-builder \
117     --prefix=/opt/rtems/4.11 4.11/rtems-sparc
118 Build Set: 4.11/rtems-sparc
119 Build Set: 4.11/rtems-autotools.bset
120 Build Set: 4.11/rtems-autotools-internal.bset
121 config: tools/rtems-autoconf-2.69-1.cfg
122 package: autoconf-2.69-x86_64-freebsd10.1-1
123 Creating source directory: sources
124 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz
125 downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%)
126 building: autoconf-2.69-x86_64-freebsd10.1-1
127 config: tools/rtems-automake-1.12.6-1.cfg
128 package: automake-1.12.6-x86_64-freebsd10.1-1
129 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz
130 downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%)
131 Creating source directory: patches
132 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff
133 downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%)
134 building: automake-1.12.6-x86_64-freebsd10.1-1
135 cleaning: autoconf-2.69-x86_64-freebsd10.1-1
136 cleaning: automake-1.12.6-x86_64-freebsd10.1-1
137 Build Set: Time 0:00:32.749337
138 Build Set: 4.11/rtems-autotools-base.bset
139 config: tools/rtems-autoconf-2.69-1.cfg
140 package: autoconf-2.69-x86_64-freebsd10.1-1
141 building: autoconf-2.69-x86_64-freebsd10.1-1
142 reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.txt
143 reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.xml
144 config: tools/rtems-automake-1.12.6-1.cfg
145 package: automake-1.12.6-x86_64-freebsd10.1-1
146 building: automake-1.12.6-x86_64-freebsd10.1-1
147 reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.txt
148 reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.xml
149 installing: autoconf-2.69-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
150 installing: automake-1.12.6-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
151 cleaning: autoconf-2.69-x86_64-freebsd10.1-1
152 cleaning: automake-1.12.6-x86_64-freebsd10.1-1
153 Build Set: Time 0:00:15.619219
154 Build Set: Time 0:00:48.371085
155 config: devel/expat-2.1.0-1.cfg
156 package: expat-2.1.0-x86_64-freebsd10.1-1
157 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz
158 downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%)
159 building: expat-2.1.0-x86_64-freebsd10.1-1
160 reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.txt
161 reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.xml
162 config: tools/rtems-binutils-2.26-1.cfg
163 package: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
164 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2
165 downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%)
166 building: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
167 reporting: tools/rtems-binutils-2.26-1.cfg ->
168 sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.txt
169 reporting: tools/rtems-binutils-2.26-1.cfg ->
170 sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.xml
171 config: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg
172 package: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
173 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gcc-4.9.3.tar.bz2 -> sources/gcc-4.9.3.tar.bz2
174 downloading: sources/gcc-4.9.3.tar.bz2 - 85.8MB of 85.8MB (100%)
175 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/newlib-2.2.0.20150423.tar.gz -> sources/newlib-2.2.0.20150423.tar.gz
176 downloading: sources/newlib-2.2.0.20150423.tar.gz - 16.7MB of 16.7MB (100%)
177 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpfr-3.0.1.tar.bz2 -> sources/mpfr-3.0.1.tar.bz2
178 downloading: sources/mpfr-3.0.1.tar.bz2 - 1.1MB of 1.1MB (100%)
179 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpc-0.8.2.tar.gz -> sources/mpc-0.8.2.tar.gz
180 downloading: sources/mpc-0.8.2.tar.gz - 535.5kB of 535.5kB (100%)
181 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gmp-5.0.5.tar.bz2 -> sources/gmp-5.0.5.tar.bz2
182 downloading: sources/gmp-5.0.5.tar.bz2 - 2.0MB of 2.0MB (100%)
183 building: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
184 reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
185 sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.txt
186 reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
187 sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.xml
188 config: tools/rtems-gdb-7.9-1.cfg
189 package: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
190 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz
191 downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%)
192 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch -> patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch
193 downloading: patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch - 1.9kB of 1.9kB (100%)
194 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch -> patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch
195 downloading: patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch - 827.0 bytes of 827.0 bytes (100%)
196 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch -> patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch
197 downloading: patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch - 2.6kB of 2.6kB (100%)
198 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch -> patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch
199 downloading: patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch - 4.9kB of 4.9kB (100%)
200 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch -> patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch
201 downloading: patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch - 871.0 bytes of 871.0 bytes (100%)
202 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch -> patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch
203 downloading: patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch - 5.6kB of 5.6kB (100%)
204 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch -> patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch
205 downloading: patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch - 1.0kB of 1.0kB (100%)
206 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch -> patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch
207 downloading: patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch - 3.6kB of 3.6kB (100%)
208 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch -> patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch
209 downloading: patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch - 1.9kB of 1.9kB (100%)
210 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch -> patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch
211 downloading: patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch - 16.0kB of 16.0kB (100%)
212 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch -> patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch
213 downloading: patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch - 14.8kB of 14.8kB (100%)
214 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch -> patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch
215 downloading: patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch - 3.8kB of 3.8kB (100%)
216 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0013-sim-erc32-Fix-a-few-compiler-warnings.patch-> patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch
217 downloading: patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch - 2.2kB of 2.2kB (100%)
218 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch -> patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch
219 downloading: patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch - 9.2kB of 9.2kB (100%)
220 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch -> patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch
221 downloading: patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch - 22.9kB of 22.9kB (100%)
222 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch -> patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch
223 downloading: patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch - 1.5kB of 1.5kB (100%)
224 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch -> patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch
225 downloading: patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch - 5.8kB of 5.8kB (100%)
226 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch -> patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch
227 downloading: patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch - 66.7kB of 66.7kB (100%)
228 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch -> patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch
229 downloading: patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch - 26.1kB of 26.1kB (100%)
230 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0020-sim-erc32-Updated-documentation.patch -> patches/0020-sim-erc32-Updated-documentation.patch
231 downloading: patches/0020-sim-erc32-Updated-documentation.patch - 16.1kB of 16.1kB (100%)
232 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0021-sim-erc32-Add-data-watchpoint-support.patch -> patches/0021-sim-erc32-Add-data-watchpoint-support.patch
233 downloading: patches/0021-sim-erc32-Add-data-watchpoint-support.patch - 10.1kB of 10.1kB (100%)
234 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch -> patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch
235 downloading: patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch - 25.5kB of 25.5kB (100%)
236 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch -> patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch
237 downloading: patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch - 1.3kB of 1.3kB (100%)
238 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff
239 downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%)
240 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff
241 downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%)
242 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/patch-gdb-python-python-config.py -> patches/patch-gdb-python-python-config.py
243 downloading: patches/patch-gdb-python-python-config.py - 449.0 bytes of 449.0 bytes (100%)
244 building: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
245 reporting: tools/rtems-gdb-7.9-1.cfg ->
246 sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.txt
247 reporting: tools/rtems-gdb-7.9-1.cfg ->
248 sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.xml
249 config: tools/rtems-tools-4.11-1.cfg
250 package: rtems-tools-4.11.0-1
251 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-tools-4.11.0.tar.xz -> sources/rtems-tools-4.11.0.tar.xz
252 downloading: sources/rtems-tools-4.11.0.tar.xz - 1.6MB of 1.6MB (100%)
253 building: rtems-tools-4.11.0-1
254 reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.txt
255 reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.xml
256 config: tools/rtems-kernel-4.11.cfg
257 package: sparc-rtems4.11-kernel-4.11.0-1
258 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-4.11.0.tar.xz -> sources/rtems-4.11.0.tar.xz
259 downloading: sources/rtems-4.11.0.tar.xz - 9.3MB of 9.3MB (100%)
260 building: sparc-rtems4.11-kernel-4.11.0-1
261 reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.txt
262 reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.xml
263 installing: expat-2.1.0-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
264 installing: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
265 installing: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
266 installing: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
267 installing: rtems-tools-4.11.0-1 -> /opt/work/rtems/4.11.0
268 installing: sparc-rtems4.11-kernel-4.11.0-1 -> /opt/work/rtems/4.11.0
269 cleaning: expat-2.1.0-x86_64-freebsd10.1-1
270 cleaning: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
271 cleaning: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
272 cleaning: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
273 cleaning: rtems-tools-4.11.0-1
274 cleaning: sparc-rtems4.11-kernel-4.11.0-1
275 Build Set: Time 0:19:15.713662
Note: See TracBrowser for help on using the repository browser.