source: rtems-docs/user/start/releases.rst @ 024e040

4.115
Last change on this file since 024e040 was 024e040, checked in by Chris Johns <chrisj@…>, on 03/21/16 at 01:19:59

Start adding Getting Started guide's Released Version.

  • Property mode set to 100644
File size: 18.8 KB
Line 
1.. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org>
2.. comment: All rights reserved.
3
4.. _released-version:
5
6Released Version
7----------------
8.. index:: tarball
9.. index:: release
10
11RTEMS releases provide a stable version of the kernel for the supported
12architectures. RTEMS maintaines the current and previous releases. Support for
13older releases is provided using the RTEMS support channels.
14
15.. sidebar:: *GDB and Python*
16
17   RTEMS uses Python in GDB to aid debugging which means GDB needs to be built
18   with Python development libraries. Please check the RSB documentation and
19   install the packages specified for your host. Make sure a python development
20   package is included.
21
22The following procedure assumes you have installed and configured your host
23operating. It also assumes you have installed any dependent packages needed
24when building the tools and the kernel.
25
26You need to select a location to build and install the RTEMS Tool chain and
27RTEMS. Make sure there is plenty of disk space and a fast disk is
28recommended. Our procedure will document building and installing the tools in a
29home directory called :file:`/opt/rtems`. This path will require root
30access. If you are working on a machine you do not have root access to you can
31use a home directory, :ref:`development-version` has more details about
32this. If building on Windows use :file:`/c/opt/rtems` to keep the top level
33paths as sohrt as possible. :ref:`microsoft-windows-installation` provides more
34detail about path lengths on Windows.
35
36The location used to install the tools and kernel is called the `prefix`. It is
37best to have a `prefix` for each different version of RTEMS you are using. If
38you are using RTEMS 4.11 in production it is not a good to install a
39development version of 4.12 over the top. A separate `prefix` for each version
40avoids this.
41
42Releases download all source packages from the RTEMS FTP server. Hosting all
43the source on the RTEMS FTP server ensures the source is present for the like
44of the release on the RTEMS FTP server. If there is a problem accessing the
45RTEMS FTP the RSB will fall back to the packages home site.
46
47.. note:: **Control the RTEMS Kernel Build**
48
49   The RTEMS kernel is built by default for releases. To not build the RTEMS
50   kernel add the ``--without-rtems`` option to the RSB command line.
51
52   By default all the BSPs for an architecture are build. If you only wish to
53   have a specific BSP build you can specify the BSP list by providing to the
54   RSB the option ``--with-rtemsbsp``. For example to build two BSPs for the
55   SPARC architecture you can supply ``--with-rtemsbsp="erc32 sis"``.
56
57This procedure will build a SPARC tool chain.
58
59RTEMS Tools Chain
60~~~~~~~~~~~~~~~~~
61
62Set up a suitable workspace to build the release in. On Unix:
63
64.. code-block:: shell
65
66 $ cd
67 $ mkdir -p development/rtems/releases
68 $ cd development/rtems/releases
69
70If building on Windows:
71
72.. code-block:: shell
73
74 $ cd /c
75 $ mkdir -p opt/rtems
76 $ cd opt/rtems
77
78**Note** the paths on Windows will be different to those shown.
79
80Download the RTEMS Source Builder (RSB) from the RTEMS FTP server:
81
82.. code-block:: shell
83
84 $ wget https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz
85 --2016-03-21 10:50:04-- https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz
86 Resolving ftp.rtems.org (ftp.rtems.org)... 140.211.10.151
87 Connecting to ftp.rtems.org (ftp.rtems.org)|140.211.10.151|:443... connected.
88 HTTP request sent, awaiting response... 200 OK
89 Length: 967056 (944K) [application/x-xz]
90 Saving to: 'rtems-source-builder-4.11.0.tar.xz'
91
92 rtems-source-builder-4.1 100%[====================================>] 944.39K 206KB/s   in 5.5s
93
94 2016-03-21 10:50:11 (173 KB/s) - 'rtems-source-builder-4.11.0.tar.xz' saved [967056/967056]
95
96Unpack the RSB release tar file. On Unix:
97
98.. code-block:: shell
99
100 $ tar Jxf rtems-source-builder-4.11.0.tar.xz
101 $ cd rtems-source-builder-4.11.0/rtems/
102
103When building on Windowss you need to shorten the path:
104
105.. code-block:: shell
106
107 $ tar Jxf rtems-source-builder-4.11.0.tar.xz
108 $ mv rtems-source-builder-4.11.0 4.110
109 $ cd 4.11.0
110
111Build a tool chain for the SPARC architecure. We are using the SPARC
112architecture in our example because GDB has a good simulator that lets us run
113and test the samples RTEMS builds by default:
114
115.. code-block:: shell
116
117 $ ../source-builder/sb-set-builder \
118     --prefix=/opt/rtems/4.11 4.11/rtems-sparc
119 Build Set: 4.11/rtems-sparc
120 Build Set: 4.11/rtems-autotools.bset
121 Build Set: 4.11/rtems-autotools-internal.bset
122 config: tools/rtems-autoconf-2.69-1.cfg
123 package: autoconf-2.69-x86_64-freebsd10.1-1
124 Creating source directory: sources
125 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz
126 downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%)
127 building: autoconf-2.69-x86_64-freebsd10.1-1
128 config: tools/rtems-automake-1.12.6-1.cfg
129 package: automake-1.12.6-x86_64-freebsd10.1-1
130 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz
131 downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%)
132 Creating source directory: patches
133 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff
134 downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%)
135 building: automake-1.12.6-x86_64-freebsd10.1-1
136 cleaning: autoconf-2.69-x86_64-freebsd10.1-1
137 cleaning: automake-1.12.6-x86_64-freebsd10.1-1
138 Build Set: Time 0:00:32.749337
139 Build Set: 4.11/rtems-autotools-base.bset
140 config: tools/rtems-autoconf-2.69-1.cfg
141 package: autoconf-2.69-x86_64-freebsd10.1-1
142 building: autoconf-2.69-x86_64-freebsd10.1-1
143 reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.txt
144 reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.xml
145 config: tools/rtems-automake-1.12.6-1.cfg
146 package: automake-1.12.6-x86_64-freebsd10.1-1
147 building: automake-1.12.6-x86_64-freebsd10.1-1
148 reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.txt
149 reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.xml
150 installing: autoconf-2.69-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
151 installing: automake-1.12.6-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
152 cleaning: autoconf-2.69-x86_64-freebsd10.1-1
153 cleaning: automake-1.12.6-x86_64-freebsd10.1-1
154 Build Set: Time 0:00:15.619219
155 Build Set: Time 0:00:48.371085
156 config: devel/expat-2.1.0-1.cfg
157 package: expat-2.1.0-x86_64-freebsd10.1-1
158 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz
159 downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%)
160 building: expat-2.1.0-x86_64-freebsd10.1-1
161 reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.txt
162 reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.xml
163 config: tools/rtems-binutils-2.26-1.cfg
164 package: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
165 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2
166 downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%)
167 building: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
168 reporting: tools/rtems-binutils-2.26-1.cfg ->
169 sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.txt
170 reporting: tools/rtems-binutils-2.26-1.cfg ->
171 sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.xml
172 config: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg
173 package: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
174 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gcc-4.9.3.tar.bz2 -> sources/gcc-4.9.3.tar.bz2
175 downloading: sources/gcc-4.9.3.tar.bz2 - 85.8MB of 85.8MB (100%)
176 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/newlib-2.2.0.20150423.tar.gz -> sources/newlib-2.2.0.20150423.tar.gz
177 downloading: sources/newlib-2.2.0.20150423.tar.gz - 16.7MB of 16.7MB (100%)
178 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpfr-3.0.1.tar.bz2 -> sources/mpfr-3.0.1.tar.bz2
179 downloading: sources/mpfr-3.0.1.tar.bz2 - 1.1MB of 1.1MB (100%)
180 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpc-0.8.2.tar.gz -> sources/mpc-0.8.2.tar.gz
181 downloading: sources/mpc-0.8.2.tar.gz - 535.5kB of 535.5kB (100%)
182 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gmp-5.0.5.tar.bz2 -> sources/gmp-5.0.5.tar.bz2
183 downloading: sources/gmp-5.0.5.tar.bz2 - 2.0MB of 2.0MB (100%)
184 building: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
185 reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
186 sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.txt
187 reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
188 sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.xml
189 config: tools/rtems-gdb-7.9-1.cfg
190 package: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
191 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz
192 downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%)
193 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch -> patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch
194 downloading: patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch - 1.9kB of 1.9kB (100%)
195 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch -> patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch
196 downloading: patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch - 827.0 bytes of 827.0 bytes (100%)
197 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch -> patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch
198 downloading: patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch - 2.6kB of 2.6kB (100%)
199 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch -> patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch
200 downloading: patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch - 4.9kB of 4.9kB (100%)
201 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch -> patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch
202 downloading: patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch - 871.0 bytes of 871.0 bytes (100%)
203 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch -> patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch
204 downloading: patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch - 5.6kB of 5.6kB (100%)
205 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch -> patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch
206 downloading: patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch - 1.0kB of 1.0kB (100%)
207 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch -> patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch
208 downloading: patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch - 3.6kB of 3.6kB (100%)
209 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch -> patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch
210 downloading: patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch - 1.9kB of 1.9kB (100%)
211 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch -> patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch
212 downloading: patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch - 16.0kB of 16.0kB (100%)
213 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch -> patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch
214 downloading: patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch - 14.8kB of 14.8kB (100%)
215 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch -> patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch
216 downloading: patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch - 3.8kB of 3.8kB (100%)
217 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0013-sim-erc32-Fix-a-few-compiler-warnings.patch-> patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch
218 downloading: patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch - 2.2kB of 2.2kB (100%)
219 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch -> patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch
220 downloading: patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch - 9.2kB of 9.2kB (100%)
221 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch -> patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch
222 downloading: patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch - 22.9kB of 22.9kB (100%)
223 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch -> patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch
224 downloading: patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch - 1.5kB of 1.5kB (100%)
225 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch -> patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch
226 downloading: patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch - 5.8kB of 5.8kB (100%)
227 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch -> patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch
228 downloading: patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch - 66.7kB of 66.7kB (100%)
229 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch -> patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch
230 downloading: patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch - 26.1kB of 26.1kB (100%)
231 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0020-sim-erc32-Updated-documentation.patch -> patches/0020-sim-erc32-Updated-documentation.patch
232 downloading: patches/0020-sim-erc32-Updated-documentation.patch - 16.1kB of 16.1kB (100%)
233 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0021-sim-erc32-Add-data-watchpoint-support.patch -> patches/0021-sim-erc32-Add-data-watchpoint-support.patch
234 downloading: patches/0021-sim-erc32-Add-data-watchpoint-support.patch - 10.1kB of 10.1kB (100%)
235 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch -> patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch
236 downloading: patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch - 25.5kB of 25.5kB (100%)
237 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch -> patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch
238 downloading: patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch - 1.3kB of 1.3kB (100%)
239 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff
240 downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%)
241 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff
242 downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%)
243 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/patch-gdb-python-python-config.py -> patches/patch-gdb-python-python-config.py
244 downloading: patches/patch-gdb-python-python-config.py - 449.0 bytes of 449.0 bytes (100%)
245 building: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
246 reporting: tools/rtems-gdb-7.9-1.cfg ->
247 sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.txt
248 reporting: tools/rtems-gdb-7.9-1.cfg ->
249 sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.xml
250 config: tools/rtems-tools-4.11-1.cfg
251 package: rtems-tools-4.11.0-1
252 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-tools-4.11.0.tar.xz -> sources/rtems-tools-4.11.0.tar.xz
253 downloading: sources/rtems-tools-4.11.0.tar.xz - 1.6MB of 1.6MB (100%)
254 building: rtems-tools-4.11.0-1
255 reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.txt
256 reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.xml
257 config: tools/rtems-kernel-4.11.cfg
258 package: sparc-rtems4.11-kernel-4.11.0-1
259 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-4.11.0.tar.xz -> sources/rtems-4.11.0.tar.xz
260 downloading: sources/rtems-4.11.0.tar.xz - 9.3MB of 9.3MB (100%)
261 building: sparc-rtems4.11-kernel-4.11.0-1
262 reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.txt
263 reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.xml
264 installing: expat-2.1.0-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
265 installing: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
266 installing: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
267 installing: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
268 installing: rtems-tools-4.11.0-1 -> /opt/work/rtems/4.11.0
269 installing: sparc-rtems4.11-kernel-4.11.0-1 -> /opt/work/rtems/4.11.0
270 cleaning: expat-2.1.0-x86_64-freebsd10.1-1
271 cleaning: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
272 cleaning: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
273 cleaning: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
274 cleaning: rtems-tools-4.11.0-1
275 cleaning: sparc-rtems4.11-kernel-4.11.0-1
276 Build Set: Time 0:19:15.713662
Note: See TracBrowser for help on using the repository browser.