source: rtems-docs/user/start/bsp-test.rst @ cb4e4e2

Last change on this file since cb4e4e2 was d2827cb, checked in by Sebastian Huber <sebastian.huber@…>, on Jan 23, 2019 at 1:29:04 PM

user: Add "Test a Board Support Package (BSP)"

  • Property mode set to 100644
File size: 2.1 KB

Test a Board Support Package (BSP)

You built a BSP with tests in the previous section. We built the erc32 BSP in :file:`$HOME/quick-start/build/b-erc32`.

?

You should run the RTEMS test suite on your target hardware. The RTEMS Project provides some support to do this, see the :ref:`Testing <Testing>` chapter for the details.

?

On the erc32 BSP we selected for this quick start chapter this is easy. Just run this command:

Error: Failed to load processor none
No macro or processor named 'none' found

This command should output something like this (omitted lines are denoted by ...). In this output the base directory :file:`$HOME/quick-start` was replaced by $BASE.

?
Error: Failed to load processor none
No macro or processor named 'none' found
Note: See TracBrowser for help on using the repository browser.