source: rtems-docs/user/installation/releases.rst @ 9fd14dd

4.115
Last change on this file since 9fd14dd was 9fd14dd, checked in by Chris Johns <chrisj@…>, on 10/28/16 at 18:32:30

user: Add comment to move to packages.
  • Property mode set to 100644
File size: 19.4 KB
Line 
1.. comment SPDX-License-Identifier: CC-BY-SA-4.0
2
3.. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org>
4.. comment: All rights reserved.
5
6.. _released-version:
7
8Releases
9--------
10.. index:: tarball
11.. index:: release
12
13RTEMS releases provide a stable version of the kernel for the supported
14architectures. RTEMS maintaines the current and previous releases. Support for
15older releases is provided using the RTEMS support channels.
16
17Please read :ref:`development-host` before continuing. The following procedure
18assumes you have installed and configured your host operating. It also assumes
19you have installed any dependent packages needed when building the tools and
20the kernel.
21
22You need to select a location to build and install the RTEMS Tool chain and
23RTEMS. Make sure there is plenty of disk space and a fast disk is
24recommended. Our procedure will document building and installing the tools in a
25base directory called :file:`/opt/rtems`. This path will require root
26access. If you are working on a machine you do not have root access to you can
27use a home directory, If building on Windows use :file:`/c/opt/rtems` to keep
28the top level paths as short as possible. :ref:`windows-path-length` provides
29more detail about path lengths on Windows.
30
31The location used to install the tools and kernel is called the
32`prefix`. :ref:`prefixes` explains prefixes and how to use them. It is best to
33have a `prefix` for each different version of RTEMS you are using. If you are
34using RTEMS 4.11 in production it is **not** a good idea to install a
35development version of 4.12 over the top by using the same `prefix` as the 4.11
36build. A separate `prefix` for each version avoids this.
37
38Released versions of the RTEMS Source Builder (RSB) downloads all source code
39for all packages from the :r:url:`ftp` rather than from the package's home
40site. Hosting all the source on the :r:url:`ftp` ensures the source is present
41for the life of the release on the :r:url:`ftp`. If there is a problem
42accessing the RTEMS FTP the RSB will fall back to the packages home site.
43
44The :r:url:`ftp` is hosted at the Oregon State University's The Open Source Lab
45(http://osuosl.org/). This is a nonprofit organization working for the
46advancement of open source technologies and RTEMS is very fortunate to be
47shosted here. It has excellent internet access and performance.
48
49.. note:: **Controlling the RTEMS Kernel Build**
50
51   Building releases by default builds the RTEMS kernel. To not build the RTEMS
52   kernel add the ``--without-rtems`` option to the RSB command line.
53
54   By default all the BSPs for an architecture are built. If you only wish to
55   have a specific BSP built you can specify the BSP list by providing to the
56   RSB the option ``--with-rtemsbsp``. For example to build two BSPs for the
57   SPARC architecture you can supply ``--with-rtemsbsp="erc32 sis"``. This can
58   speed the build time up for some architectures that have a lot of BSPs.
59
60Once you have built the tools and kernel you can move to the Packages section
61of the manual.
62
63RTEMS Tools and Kernel
64~~~~~~~~~~~~~~~~~~~~~~
65
66This procedure will build a SPARC tool chain. Set up a suitable workspace to
67build the release in. On Unix:
68
69.. code-block:: shell
70
71 $ cd
72 $ mkdir -p development/rtems/releases
73 $ cd development/rtems/releases
74
75If building on Windows:
76
77.. code-block:: shell
78
79 $ cd /c
80 $ mkdir -p opt/rtems
81 $ cd opt/rtems
82
83**Note** the paths on Windows will be different to those shown.
84
85Download the RTEMS Source Builder (RSB) from the RTEMS FTP server:
86
87.. code-block:: shell
88
89 $ wget https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz
90 --2016-03-21 10:50:04-- https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz
91 Resolving ftp.rtems.org (ftp.rtems.org)... 140.211.10.151
92 Connecting to ftp.rtems.org (ftp.rtems.org)|140.211.10.151|:443... connected.
93 HTTP request sent, awaiting response... 200 OK
94 Length: 967056 (944K) [application/x-xz]
95 Saving to: 'rtems-source-builder-4.11.0.tar.xz'
96
97 rtems-source-builder-4.1 100%[====================================>] 944.39K 206KB/s   in 5.5s
98
99 2016-03-21 10:50:11 (173 KB/s) - 'rtems-source-builder-4.11.0.tar.xz' saved [967056/967056]
100
101On Unix unpack the RSB release tar file using:
102
103.. code-block:: shell
104
105 $ tar Jxf rtems-source-builder-4.11.0.tar.xz
106 $ cd rtems-source-builder-4.11.0/rtems/
107
108On Windows you need to shorten the path (See :ref:`windows-path-length`) after
109you have unpacked the tar file:
110
111.. code-block:: shell
112
113 $ tar Jxf rtems-source-builder-4.11.0.tar.xz
114 $ mv rtems-source-builder-4.11.0 4.110
115 $ cd 4.11.0
116
117Build a tool chain for the SPARC architecure. We are using the SPARC
118architecture in our example because GDB has a good simulator that lets us run
119and test the samples RTEMS builds by default
120
121If building on Windows add ``--jobs=none`` to avoid GNU make issues on Windows
122discussed in :ref:`msys2_parallel_builds`.
123
124.. code-block:: shell
125
126 $ ../source-builder/sb-set-builder \
127     --prefix=/opt/rtems/4.11 4.11/rtems-sparc
128 Build Set: 4.11/rtems-sparc
129 Build Set: 4.11/rtems-autotools.bset
130 Build Set: 4.11/rtems-autotools-internal.bset
131 config: tools/rtems-autoconf-2.69-1.cfg
132 package: autoconf-2.69-x86_64-freebsd10.1-1
133 Creating source directory: sources
134 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz
135 downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%)
136 building: autoconf-2.69-x86_64-freebsd10.1-1
137 config: tools/rtems-automake-1.12.6-1.cfg
138 package: automake-1.12.6-x86_64-freebsd10.1-1
139 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz
140 downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%)
141 Creating source directory: patches
142 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff
143 downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%)
144 building: automake-1.12.6-x86_64-freebsd10.1-1
145 cleaning: autoconf-2.69-x86_64-freebsd10.1-1
146 cleaning: automake-1.12.6-x86_64-freebsd10.1-1
147 Build Set: Time 0:00:32.749337
148 Build Set: 4.11/rtems-autotools-base.bset
149 config: tools/rtems-autoconf-2.69-1.cfg
150 package: autoconf-2.69-x86_64-freebsd10.1-1
151 building: autoconf-2.69-x86_64-freebsd10.1-1
152 reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.txt
153 reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.xml
154 config: tools/rtems-automake-1.12.6-1.cfg
155 package: automake-1.12.6-x86_64-freebsd10.1-1
156 building: automake-1.12.6-x86_64-freebsd10.1-1
157 reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.txt
158 reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.xml
159 installing: autoconf-2.69-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
160 installing: automake-1.12.6-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
161 cleaning: autoconf-2.69-x86_64-freebsd10.1-1
162 cleaning: automake-1.12.6-x86_64-freebsd10.1-1
163 Build Set: Time 0:00:15.619219
164 Build Set: Time 0:00:48.371085
165 config: devel/expat-2.1.0-1.cfg
166 package: expat-2.1.0-x86_64-freebsd10.1-1
167 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz
168 downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%)
169 building: expat-2.1.0-x86_64-freebsd10.1-1
170 reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.txt
171 reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.xml
172 config: tools/rtems-binutils-2.26-1.cfg
173 package: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
174 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2
175 downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%)
176 building: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
177 reporting: tools/rtems-binutils-2.26-1.cfg ->
178 sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.txt
179 reporting: tools/rtems-binutils-2.26-1.cfg ->
180 sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.xml
181 config: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg
182 package: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
183 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gcc-4.9.3.tar.bz2 -> sources/gcc-4.9.3.tar.bz2
184 downloading: sources/gcc-4.9.3.tar.bz2 - 85.8MB of 85.8MB (100%)
185 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/newlib-2.2.0.20150423.tar.gz -> sources/newlib-2.2.0.20150423.tar.gz
186 downloading: sources/newlib-2.2.0.20150423.tar.gz - 16.7MB of 16.7MB (100%)
187 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpfr-3.0.1.tar.bz2 -> sources/mpfr-3.0.1.tar.bz2
188 downloading: sources/mpfr-3.0.1.tar.bz2 - 1.1MB of 1.1MB (100%)
189 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpc-0.8.2.tar.gz -> sources/mpc-0.8.2.tar.gz
190 downloading: sources/mpc-0.8.2.tar.gz - 535.5kB of 535.5kB (100%)
191 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gmp-5.0.5.tar.bz2 -> sources/gmp-5.0.5.tar.bz2
192 downloading: sources/gmp-5.0.5.tar.bz2 - 2.0MB of 2.0MB (100%)
193 building: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
194 reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
195 sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.txt
196 reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
197 sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.xml
198 config: tools/rtems-gdb-7.9-1.cfg
199 package: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
200 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz
201 downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%)
202 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch -> patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch
203 downloading: patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch - 1.9kB of 1.9kB (100%)
204 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch -> patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch
205 downloading: patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch - 827.0 bytes of 827.0 bytes (100%)
206 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch -> patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch
207 downloading: patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch - 2.6kB of 2.6kB (100%)
208 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch -> patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch
209 downloading: patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch - 4.9kB of 4.9kB (100%)
210 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch -> patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch
211 downloading: patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch - 871.0 bytes of 871.0 bytes (100%)
212 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch -> patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch
213 downloading: patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch - 5.6kB of 5.6kB (100%)
214 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch -> patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch
215 downloading: patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch - 1.0kB of 1.0kB (100%)
216 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch -> patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch
217 downloading: patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch - 3.6kB of 3.6kB (100%)
218 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch -> patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch
219 downloading: patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch - 1.9kB of 1.9kB (100%)
220 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch -> patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch
221 downloading: patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch - 16.0kB of 16.0kB (100%)
222 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch -> patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch
223 downloading: patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch - 14.8kB of 14.8kB (100%)
224 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch -> patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch
225 downloading: patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch - 3.8kB of 3.8kB (100%)
226 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0013-sim-erc32-Fix-a-few-compiler-warnings.patch-> patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch
227 downloading: patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch - 2.2kB of 2.2kB (100%)
228 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch -> patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch
229 downloading: patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch - 9.2kB of 9.2kB (100%)
230 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch -> patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch
231 downloading: patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch - 22.9kB of 22.9kB (100%)
232 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch -> patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch
233 downloading: patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch - 1.5kB of 1.5kB (100%)
234 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch -> patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch
235 downloading: patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch - 5.8kB of 5.8kB (100%)
236 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch -> patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch
237 downloading: patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch - 66.7kB of 66.7kB (100%)
238 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch -> patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch
239 downloading: patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch - 26.1kB of 26.1kB (100%)
240 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0020-sim-erc32-Updated-documentation.patch -> patches/0020-sim-erc32-Updated-documentation.patch
241 downloading: patches/0020-sim-erc32-Updated-documentation.patch - 16.1kB of 16.1kB (100%)
242 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0021-sim-erc32-Add-data-watchpoint-support.patch -> patches/0021-sim-erc32-Add-data-watchpoint-support.patch
243 downloading: patches/0021-sim-erc32-Add-data-watchpoint-support.patch - 10.1kB of 10.1kB (100%)
244 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch -> patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch
245 downloading: patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch - 25.5kB of 25.5kB (100%)
246 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch -> patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch
247 downloading: patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch - 1.3kB of 1.3kB (100%)
248 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff
249 downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%)
250 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff
251 downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%)
252 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/patch-gdb-python-python-config.py -> patches/patch-gdb-python-python-config.py
253 downloading: patches/patch-gdb-python-python-config.py - 449.0 bytes of 449.0 bytes (100%)
254 building: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
255 reporting: tools/rtems-gdb-7.9-1.cfg ->
256 sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.txt
257 reporting: tools/rtems-gdb-7.9-1.cfg ->
258 sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.xml
259 config: tools/rtems-tools-4.11-1.cfg
260 package: rtems-tools-4.11.0-1
261 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-tools-4.11.0.tar.xz -> sources/rtems-tools-4.11.0.tar.xz
262 downloading: sources/rtems-tools-4.11.0.tar.xz - 1.6MB of 1.6MB (100%)
263 building: rtems-tools-4.11.0-1
264 reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.txt
265 reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.xml
266 config: tools/rtems-kernel-4.11.cfg
267 package: sparc-rtems4.11-kernel-4.11.0-1
268 download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-4.11.0.tar.xz -> sources/rtems-4.11.0.tar.xz
269 downloading: sources/rtems-4.11.0.tar.xz - 9.3MB of 9.3MB (100%)
270 building: sparc-rtems4.11-kernel-4.11.0-1
271 reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.txt
272 reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.xml
273 installing: expat-2.1.0-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
274 installing: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
275 installing: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
276 installing: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
277 installing: rtems-tools-4.11.0-1 -> /opt/work/rtems/4.11.0
278 installing: sparc-rtems4.11-kernel-4.11.0-1 -> /opt/work/rtems/4.11.0
279 cleaning: expat-2.1.0-x86_64-freebsd10.1-1
280 cleaning: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
281 cleaning: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
282 cleaning: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
283 cleaning: rtems-tools-4.11.0-1
284 cleaning: sparc-rtems4.11-kernel-4.11.0-1
285 Build Set: Time 0:19:15.713662
286
287You can now build a 3rd party library or an application as defailted in TBD.
Note: See TracBrowser for help on using the repository browser.