[489740f] | 1 | .. comment SPDX-License-Identifier: CC-BY-SA-4.0 |
---|
| 2 | |
---|
[4e3cf2b] | 3 | .. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org> |
---|
| 4 | .. comment: All rights reserved. |
---|
| 5 | |
---|
| 6 | .. _released-version: |
---|
| 7 | |
---|
[86518bd] | 8 | Releases |
---|
| 9 | -------- |
---|
[024e040] | 10 | .. index:: tarball |
---|
| 11 | .. index:: release |
---|
[4e3cf2b] | 12 | |
---|
[024e040] | 13 | RTEMS releases provide a stable version of the kernel for the supported |
---|
| 14 | architectures. RTEMS maintaines the current and previous releases. Support for |
---|
| 15 | older releases is provided using the RTEMS support channels. |
---|
[4e3cf2b] | 16 | |
---|
[86518bd] | 17 | Please read :ref:`development-host` before continuing. The following procedure |
---|
| 18 | assumes you have installed and configured your host operating. It also assumes |
---|
| 19 | you have installed any dependent packages needed when building the tools and |
---|
| 20 | the kernel. |
---|
[024e040] | 21 | |
---|
| 22 | You need to select a location to build and install the RTEMS Tool chain and |
---|
| 23 | RTEMS. Make sure there is plenty of disk space and a fast disk is |
---|
| 24 | recommended. Our procedure will document building and installing the tools in a |
---|
[86518bd] | 25 | base directory called :file:`/opt/rtems`. This path will require root |
---|
[024e040] | 26 | access. If you are working on a machine you do not have root access to you can |
---|
[86518bd] | 27 | use a home directory, If building on Windows use :file:`/c/opt/rtems` to keep |
---|
| 28 | the top level paths as short as possible. :ref:`windows-path-length` provides |
---|
| 29 | more detail about path lengths on Windows. |
---|
[024e040] | 30 | |
---|
[dc234b5] | 31 | The location used to install the tools and kernel is called the |
---|
| 32 | `prefix`. :ref:`prefixes` explains prefixes and how to use them. It is best to |
---|
| 33 | have a `prefix` for each different version of RTEMS you are using. If you are |
---|
[a34c157] | 34 | using RTEMS 4.11 in production it is **not** a good idea to install a |
---|
| 35 | development version of 4.12 over the top by using the same `prefix` as the 4.11 |
---|
| 36 | build. A separate `prefix` for each version avoids this. |
---|
[024e040] | 37 | |
---|
[86518bd] | 38 | Released versions of the RTEMS Source Builder (RSB) downloads all source code |
---|
| 39 | for all packages from the :r:url:`ftp` rather than from the package's home |
---|
| 40 | site. Hosting all the source on the :r:url:`ftp` ensures the source is present |
---|
| 41 | for the life of the release on the :r:url:`ftp`. If there is a problem |
---|
| 42 | accessing the RTEMS FTP the RSB will fall back to the packages home site. |
---|
[a34c157] | 43 | |
---|
| 44 | The :r:url:`ftp` is hosted at the Oregon State University's The Open Source Lab |
---|
| 45 | (http://osuosl.org/). This is a nonprofit organization working for the |
---|
[86518bd] | 46 | advancement of open source technologies and RTEMS is very fortunate to be |
---|
| 47 | shosted here. It has excellent internet access and performance. |
---|
[024e040] | 48 | |
---|
[2151927] | 49 | .. note:: **Controlling the RTEMS Kernel Build** |
---|
[024e040] | 50 | |
---|
[dc234b5] | 51 | Building releases by default builds the RTEMS kernel. To not build the RTEMS |
---|
[024e040] | 52 | kernel add the ``--without-rtems`` option to the RSB command line. |
---|
| 53 | |
---|
[27bcdfb] | 54 | By default all the BSPs for an architecture are built. If you only wish to |
---|
[dc234b5] | 55 | have a specific BSP built you can specify the BSP list by providing to the |
---|
[024e040] | 56 | RSB the option ``--with-rtemsbsp``. For example to build two BSPs for the |
---|
[dc234b5] | 57 | SPARC architecture you can supply ``--with-rtemsbsp="erc32 sis"``. This can |
---|
| 58 | speed the build time up for some architectures that have a lot of BSPs. |
---|
[024e040] | 59 | |
---|
[86518bd] | 60 | RTEMS Tools and Kernel |
---|
| 61 | ~~~~~~~~~~~~~~~~~~~~~~ |
---|
[024e040] | 62 | |
---|
[a34c157] | 63 | This procedure will build a SPARC tool chain. Set up a suitable workspace to |
---|
| 64 | build the release in. On Unix: |
---|
[024e040] | 65 | |
---|
| 66 | .. code-block:: shell |
---|
| 67 | |
---|
| 68 | $ cd |
---|
| 69 | $ mkdir -p development/rtems/releases |
---|
| 70 | $ cd development/rtems/releases |
---|
| 71 | |
---|
| 72 | If building on Windows: |
---|
| 73 | |
---|
| 74 | .. code-block:: shell |
---|
| 75 | |
---|
| 76 | $ cd /c |
---|
| 77 | $ mkdir -p opt/rtems |
---|
| 78 | $ cd opt/rtems |
---|
| 79 | |
---|
| 80 | **Note** the paths on Windows will be different to those shown. |
---|
| 81 | |
---|
| 82 | Download the RTEMS Source Builder (RSB) from the RTEMS FTP server: |
---|
| 83 | |
---|
| 84 | .. code-block:: shell |
---|
| 85 | |
---|
| 86 | $ wget https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz |
---|
| 87 | --2016-03-21 10:50:04-- https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz |
---|
| 88 | Resolving ftp.rtems.org (ftp.rtems.org)... 140.211.10.151 |
---|
| 89 | Connecting to ftp.rtems.org (ftp.rtems.org)|140.211.10.151|:443... connected. |
---|
| 90 | HTTP request sent, awaiting response... 200 OK |
---|
| 91 | Length: 967056 (944K) [application/x-xz] |
---|
| 92 | Saving to: 'rtems-source-builder-4.11.0.tar.xz' |
---|
| 93 | |
---|
| 94 | rtems-source-builder-4.1 100%[====================================>] 944.39K 206KB/s in 5.5s |
---|
| 95 | |
---|
| 96 | 2016-03-21 10:50:11 (173 KB/s) - 'rtems-source-builder-4.11.0.tar.xz' saved [967056/967056] |
---|
| 97 | |
---|
[27bcdfb] | 98 | On Unix unpack the RSB release tar file using: |
---|
[024e040] | 99 | |
---|
| 100 | .. code-block:: shell |
---|
| 101 | |
---|
| 102 | $ tar Jxf rtems-source-builder-4.11.0.tar.xz |
---|
| 103 | $ cd rtems-source-builder-4.11.0/rtems/ |
---|
| 104 | |
---|
[27bcdfb] | 105 | On Windows you need to shorten the path (See :ref:`windows-path-length`) after |
---|
| 106 | you have unpacked the tar file: |
---|
[024e040] | 107 | |
---|
| 108 | .. code-block:: shell |
---|
| 109 | |
---|
| 110 | $ tar Jxf rtems-source-builder-4.11.0.tar.xz |
---|
| 111 | $ mv rtems-source-builder-4.11.0 4.110 |
---|
| 112 | $ cd 4.11.0 |
---|
| 113 | |
---|
| 114 | Build a tool chain for the SPARC architecure. We are using the SPARC |
---|
| 115 | architecture in our example because GDB has a good simulator that lets us run |
---|
[27bcdfb] | 116 | and test the samples RTEMS builds by default |
---|
| 117 | |
---|
[2151927] | 118 | If building on Windows add ``--jobs=none`` to avoid GNU make issues on Windows |
---|
| 119 | discussed in :ref:`msys2_parallel_builds`. |
---|
[024e040] | 120 | |
---|
| 121 | .. code-block:: shell |
---|
| 122 | |
---|
| 123 | $ ../source-builder/sb-set-builder \ |
---|
| 124 | --prefix=/opt/rtems/4.11 4.11/rtems-sparc |
---|
| 125 | Build Set: 4.11/rtems-sparc |
---|
| 126 | Build Set: 4.11/rtems-autotools.bset |
---|
| 127 | Build Set: 4.11/rtems-autotools-internal.bset |
---|
| 128 | config: tools/rtems-autoconf-2.69-1.cfg |
---|
| 129 | package: autoconf-2.69-x86_64-freebsd10.1-1 |
---|
| 130 | Creating source directory: sources |
---|
| 131 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz |
---|
| 132 | downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%) |
---|
| 133 | building: autoconf-2.69-x86_64-freebsd10.1-1 |
---|
| 134 | config: tools/rtems-automake-1.12.6-1.cfg |
---|
| 135 | package: automake-1.12.6-x86_64-freebsd10.1-1 |
---|
| 136 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz |
---|
| 137 | downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%) |
---|
| 138 | Creating source directory: patches |
---|
| 139 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff |
---|
| 140 | downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%) |
---|
| 141 | building: automake-1.12.6-x86_64-freebsd10.1-1 |
---|
| 142 | cleaning: autoconf-2.69-x86_64-freebsd10.1-1 |
---|
| 143 | cleaning: automake-1.12.6-x86_64-freebsd10.1-1 |
---|
| 144 | Build Set: Time 0:00:32.749337 |
---|
| 145 | Build Set: 4.11/rtems-autotools-base.bset |
---|
| 146 | config: tools/rtems-autoconf-2.69-1.cfg |
---|
| 147 | package: autoconf-2.69-x86_64-freebsd10.1-1 |
---|
| 148 | building: autoconf-2.69-x86_64-freebsd10.1-1 |
---|
| 149 | reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.txt |
---|
| 150 | reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.xml |
---|
| 151 | config: tools/rtems-automake-1.12.6-1.cfg |
---|
| 152 | package: automake-1.12.6-x86_64-freebsd10.1-1 |
---|
| 153 | building: automake-1.12.6-x86_64-freebsd10.1-1 |
---|
| 154 | reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.txt |
---|
| 155 | reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.xml |
---|
| 156 | installing: autoconf-2.69-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 |
---|
| 157 | installing: automake-1.12.6-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 |
---|
| 158 | cleaning: autoconf-2.69-x86_64-freebsd10.1-1 |
---|
| 159 | cleaning: automake-1.12.6-x86_64-freebsd10.1-1 |
---|
| 160 | Build Set: Time 0:00:15.619219 |
---|
| 161 | Build Set: Time 0:00:48.371085 |
---|
| 162 | config: devel/expat-2.1.0-1.cfg |
---|
| 163 | package: expat-2.1.0-x86_64-freebsd10.1-1 |
---|
| 164 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz |
---|
| 165 | downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%) |
---|
| 166 | building: expat-2.1.0-x86_64-freebsd10.1-1 |
---|
| 167 | reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.txt |
---|
| 168 | reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.xml |
---|
| 169 | config: tools/rtems-binutils-2.26-1.cfg |
---|
| 170 | package: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 |
---|
| 171 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2 |
---|
| 172 | downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%) |
---|
| 173 | building: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 |
---|
| 174 | reporting: tools/rtems-binutils-2.26-1.cfg -> |
---|
| 175 | sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.txt |
---|
| 176 | reporting: tools/rtems-binutils-2.26-1.cfg -> |
---|
| 177 | sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.xml |
---|
| 178 | config: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg |
---|
| 179 | package: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 |
---|
| 180 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gcc-4.9.3.tar.bz2 -> sources/gcc-4.9.3.tar.bz2 |
---|
| 181 | downloading: sources/gcc-4.9.3.tar.bz2 - 85.8MB of 85.8MB (100%) |
---|
| 182 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/newlib-2.2.0.20150423.tar.gz -> sources/newlib-2.2.0.20150423.tar.gz |
---|
| 183 | downloading: sources/newlib-2.2.0.20150423.tar.gz - 16.7MB of 16.7MB (100%) |
---|
| 184 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpfr-3.0.1.tar.bz2 -> sources/mpfr-3.0.1.tar.bz2 |
---|
| 185 | downloading: sources/mpfr-3.0.1.tar.bz2 - 1.1MB of 1.1MB (100%) |
---|
| 186 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpc-0.8.2.tar.gz -> sources/mpc-0.8.2.tar.gz |
---|
| 187 | downloading: sources/mpc-0.8.2.tar.gz - 535.5kB of 535.5kB (100%) |
---|
| 188 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gmp-5.0.5.tar.bz2 -> sources/gmp-5.0.5.tar.bz2 |
---|
| 189 | downloading: sources/gmp-5.0.5.tar.bz2 - 2.0MB of 2.0MB (100%) |
---|
| 190 | building: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 |
---|
| 191 | reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg -> |
---|
| 192 | sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.txt |
---|
| 193 | reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg -> |
---|
| 194 | sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.xml |
---|
| 195 | config: tools/rtems-gdb-7.9-1.cfg |
---|
| 196 | package: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 |
---|
| 197 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz |
---|
| 198 | downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%) |
---|
| 199 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch -> patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch |
---|
| 200 | downloading: patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch - 1.9kB of 1.9kB (100%) |
---|
| 201 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch -> patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch |
---|
| 202 | downloading: patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch - 827.0 bytes of 827.0 bytes (100%) |
---|
| 203 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch -> patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch |
---|
| 204 | downloading: patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch - 2.6kB of 2.6kB (100%) |
---|
| 205 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch -> patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch |
---|
| 206 | downloading: patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch - 4.9kB of 4.9kB (100%) |
---|
| 207 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch -> patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch |
---|
| 208 | downloading: patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch - 871.0 bytes of 871.0 bytes (100%) |
---|
| 209 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch -> patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch |
---|
| 210 | downloading: patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch - 5.6kB of 5.6kB (100%) |
---|
| 211 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch -> patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch |
---|
| 212 | downloading: patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch - 1.0kB of 1.0kB (100%) |
---|
| 213 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch -> patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch |
---|
| 214 | downloading: patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch - 3.6kB of 3.6kB (100%) |
---|
| 215 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch -> patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch |
---|
| 216 | downloading: patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch - 1.9kB of 1.9kB (100%) |
---|
| 217 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch -> patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch |
---|
| 218 | downloading: patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch - 16.0kB of 16.0kB (100%) |
---|
| 219 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch -> patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch |
---|
| 220 | downloading: patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch - 14.8kB of 14.8kB (100%) |
---|
| 221 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch -> patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch |
---|
| 222 | downloading: patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch - 3.8kB of 3.8kB (100%) |
---|
| 223 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0013-sim-erc32-Fix-a-few-compiler-warnings.patch-> patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch |
---|
| 224 | downloading: patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch - 2.2kB of 2.2kB (100%) |
---|
| 225 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch -> patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch |
---|
| 226 | downloading: patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch - 9.2kB of 9.2kB (100%) |
---|
| 227 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch -> patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch |
---|
| 228 | downloading: patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch - 22.9kB of 22.9kB (100%) |
---|
| 229 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch -> patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch |
---|
| 230 | downloading: patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch - 1.5kB of 1.5kB (100%) |
---|
| 231 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch -> patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch |
---|
| 232 | downloading: patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch - 5.8kB of 5.8kB (100%) |
---|
| 233 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch -> patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch |
---|
| 234 | downloading: patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch - 66.7kB of 66.7kB (100%) |
---|
| 235 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch -> patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch |
---|
| 236 | downloading: patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch - 26.1kB of 26.1kB (100%) |
---|
| 237 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0020-sim-erc32-Updated-documentation.patch -> patches/0020-sim-erc32-Updated-documentation.patch |
---|
| 238 | downloading: patches/0020-sim-erc32-Updated-documentation.patch - 16.1kB of 16.1kB (100%) |
---|
| 239 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0021-sim-erc32-Add-data-watchpoint-support.patch -> patches/0021-sim-erc32-Add-data-watchpoint-support.patch |
---|
| 240 | downloading: patches/0021-sim-erc32-Add-data-watchpoint-support.patch - 10.1kB of 10.1kB (100%) |
---|
| 241 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch -> patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch |
---|
| 242 | downloading: patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch - 25.5kB of 25.5kB (100%) |
---|
| 243 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch -> patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch |
---|
| 244 | downloading: patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch - 1.3kB of 1.3kB (100%) |
---|
| 245 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff |
---|
| 246 | downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%) |
---|
| 247 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff |
---|
| 248 | downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%) |
---|
| 249 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/patch-gdb-python-python-config.py -> patches/patch-gdb-python-python-config.py |
---|
| 250 | downloading: patches/patch-gdb-python-python-config.py - 449.0 bytes of 449.0 bytes (100%) |
---|
| 251 | building: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 |
---|
| 252 | reporting: tools/rtems-gdb-7.9-1.cfg -> |
---|
| 253 | sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.txt |
---|
| 254 | reporting: tools/rtems-gdb-7.9-1.cfg -> |
---|
| 255 | sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.xml |
---|
| 256 | config: tools/rtems-tools-4.11-1.cfg |
---|
| 257 | package: rtems-tools-4.11.0-1 |
---|
| 258 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-tools-4.11.0.tar.xz -> sources/rtems-tools-4.11.0.tar.xz |
---|
| 259 | downloading: sources/rtems-tools-4.11.0.tar.xz - 1.6MB of 1.6MB (100%) |
---|
| 260 | building: rtems-tools-4.11.0-1 |
---|
| 261 | reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.txt |
---|
| 262 | reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.xml |
---|
| 263 | config: tools/rtems-kernel-4.11.cfg |
---|
| 264 | package: sparc-rtems4.11-kernel-4.11.0-1 |
---|
| 265 | download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-4.11.0.tar.xz -> sources/rtems-4.11.0.tar.xz |
---|
| 266 | downloading: sources/rtems-4.11.0.tar.xz - 9.3MB of 9.3MB (100%) |
---|
| 267 | building: sparc-rtems4.11-kernel-4.11.0-1 |
---|
| 268 | reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.txt |
---|
| 269 | reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.xml |
---|
| 270 | installing: expat-2.1.0-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 |
---|
| 271 | installing: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 |
---|
| 272 | installing: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 |
---|
| 273 | installing: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 |
---|
| 274 | installing: rtems-tools-4.11.0-1 -> /opt/work/rtems/4.11.0 |
---|
| 275 | installing: sparc-rtems4.11-kernel-4.11.0-1 -> /opt/work/rtems/4.11.0 |
---|
| 276 | cleaning: expat-2.1.0-x86_64-freebsd10.1-1 |
---|
| 277 | cleaning: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 |
---|
| 278 | cleaning: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 |
---|
| 279 | cleaning: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 |
---|
| 280 | cleaning: rtems-tools-4.11.0-1 |
---|
| 281 | cleaning: sparc-rtems4.11-kernel-4.11.0-1 |
---|
| 282 | Build Set: Time 0:19:15.713662 |
---|
[86518bd] | 283 | |
---|
| 284 | You can now build a 3rd party library or an application as defailted in TBD. |
---|