/*
 * Network configuration -- QEMU NOT using DHCP
 * 
 ************************************************************
 * EDIT THIS FILE TO REFLECT YOUR NETWORK CONFIGURATION     *
 * BEFORE RUNNING ANY RTEMS PROGRAMS WHICH USE THE NETWORK! * 
 ************************************************************
 *
 *  networkconfig.h,v 1.8 2001/08/31 18:11:43 joel Exp
 */

#ifndef _RTEMS_NETWORKCONFIG_H_
#define _RTEMS_NETWORKCONFIG_H_

/*
 *  The following will normally be set by the BSP if it supports
 *  a single network device driver.  In the event, it supports
 *  multiple network device drivers, then the user's default
 *  network device driver will have to be selected by a BSP
 *  specific mechanism.
 */

#undef RTEMS_BSP_NETWORK_DRIVER_NAME
#undef RTEMS_BSP_NETWORK_DRIVER_ATTACH
#define RTEMS_BSP_NETWORK_DRIVER_NAME    "ne1"
#define RTEMS_BSP_NETWORK_DRIVER_ATTACH  rtems_ne_driver_attach

#ifdef RTEMS_USE_BOOTP
#undef RTEMS_USE_BOOTP
#endif

/*
 * If you use DHCP on the QEMU instance, there is less configuration
 */
// #define RTEMS_USE_BOOTP

#include <bsp.h>

/*
 * Define RTEMS_SET_ETHERNET_ADDRESS if you want to specify the
 * Ethernet address here.  If RTEMS_SET_ETHERNET_ADDRESS is not
 * defined the driver will choose an address.
 */
//#define RTEMS_SET_ETHERNET_ADDRESS
#ifdef RTEMS_SET_ETHERNET_ADDRESS
#undef RTEMS_SET_ETHERNET_ADDRESS
#endif

#if (defined (RTEMS_SET_ETHERNET_ADDRESS))
/* static char ethernet_address[6] = { 0x08, 0x00, 0x3e, 0x12, 0x28, 0xb1 }; */
static char ethernet_address[6] = { 0x00, 0x80, 0x7F, 0x22, 0x61, 0x77 };
#endif

#ifdef RTEMS_USE_LOOPBACK 
/*
 * Loopback interface
 */
extern void rtems_bsdnet_loopattach();
static struct rtems_bsdnet_ifconfig loopback_config = {
	"lo0",				/* name */
	rtems_bsdnet_loopattach,	/* attach function */

	NULL,				/* link to next interface */

	"127.0.0.1",			/* IP address */
	"255.0.0.0",			/* IP net mask */
};
#endif

/*
 * Default network interface
 */
static struct rtems_bsdnet_ifconfig netdriver_config = {
	RTEMS_BSP_NETWORK_DRIVER_NAME,		/* name */
	RTEMS_BSP_NETWORK_DRIVER_ATTACH,	/* attach function */

#ifdef RTEMS_USE_LOOPBACK 
	&loopback_config,		/* link to next interface */
#else
	NULL,				/* No more interfaces */
#endif

#if (defined (RTEMS_USE_BOOTP))
	NULL,				/* BOOTP supplies IP address */
	NULL,				/* BOOTP supplies IP net mask */
#else
	"10.0.2.5",			/* IP address */
	"255.255.255.0",		/* IP net mask */
#endif /* !RTEMS_USE_BOOTP */

#if (defined (RTEMS_SET_ETHERNET_ADDRESS))
	ethernet_address,               /* Ethernet hardware address */
#else
	NULL,                           /* Driver supplies hardware address */
#endif
	0,				/* Use default driver parameters */
	0, /* mtu */
	0, /* rbuf_count */
	0, /* xbuf_count */
	0, /* port */
	9 /* irq */
};

/*
 * Network configuration
 */
struct rtems_bsdnet_config rtems_bsdnet_config = {
	&netdriver_config,

#if (defined (RTEMS_USE_BOOTP))
	rtems_bsdnet_do_bootp,
#else
	NULL,
#endif

	0,			/* Default network task priority */
	256 * 1024,			/* Default mbuf capacity */
	256 * 1024,			/* Default mbuf cluster capacity */

#if (!defined (RTEMS_USE_BOOTP))
	"rtems",	/* Host name */
	"",		/* Domain name */
	"10.0.2.1",	/* Gateway */
	"10.0.0.1",	/* Log host */
	{"10.0.2.3" },	/* Name server(s) */
	{"" },	/* NTP server(s) */

#endif /* !RTEMS_USE_BOOTP */

};

/*
 * For TFTP test application
 */
#if (defined (RTEMS_USE_BOOTP))
#define RTEMS_TFTP_TEST_HOST_NAME "BOOTP_HOST"
#define RTEMS_TFTP_TEST_FILE_NAME "BOOTP_FILE"
#else
#define RTEMS_TFTP_TEST_HOST_NAME "XXX.YYY.ZZZ.XYZ"
#define RTEMS_TFTP_TEST_FILE_NAME "tftptest"
#endif

/*
 * For NFS test application
 * 
 * NFS mount and a directory to ls once mounted
 */
#define RTEMS_NFS_SERVER      "192.168.1.210"
#define RTEMS_NFS_SERVER_PATH "/home"
#define RTEMS_NFS_LS_PATH     "/mnt/nfstest"

#endif /* _RTEMS_NETWORKCONFIG_H_ */