[51ed002] | 1 | /* |
---|
[ea7c3bf] | 2 | * Network configuration -- QEMU NOT using DHCP |
---|
[51ed002] | 3 | * |
---|
| 4 | ************************************************************ |
---|
| 5 | * EDIT THIS FILE TO REFLECT YOUR NETWORK CONFIGURATION * |
---|
| 6 | * BEFORE RUNNING ANY RTEMS PROGRAMS WHICH USE THE NETWORK! * |
---|
| 7 | ************************************************************ |
---|
| 8 | * |
---|
| 9 | * networkconfig.h,v 1.8 2001/08/31 18:11:43 joel Exp |
---|
| 10 | */ |
---|
| 11 | |
---|
| 12 | #ifndef _RTEMS_NETWORKCONFIG_H_ |
---|
| 13 | #define _RTEMS_NETWORKCONFIG_H_ |
---|
| 14 | |
---|
| 15 | /* |
---|
| 16 | * The following will normally be set by the BSP if it supports |
---|
| 17 | * a single network device driver. In the event, it supports |
---|
| 18 | * multiple network device drivers, then the user's default |
---|
| 19 | * network device driver will have to be selected by a BSP |
---|
| 20 | * specific mechanism. |
---|
| 21 | */ |
---|
| 22 | |
---|
| 23 | #undef RTEMS_BSP_NETWORK_DRIVER_NAME |
---|
| 24 | #undef RTEMS_BSP_NETWORK_DRIVER_ATTACH |
---|
| 25 | #define RTEMS_BSP_NETWORK_DRIVER_NAME "ne1" |
---|
| 26 | #define RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_ne_driver_attach |
---|
| 27 | |
---|
| 28 | #ifdef RTEMS_USE_BOOTP |
---|
| 29 | #undef RTEMS_USE_BOOTP |
---|
| 30 | #endif |
---|
| 31 | |
---|
| 32 | /* |
---|
| 33 | * If you use DHCP on the QEMU instance, there is less configuration |
---|
| 34 | */ |
---|
[ea7c3bf] | 35 | // #define RTEMS_USE_BOOTP |
---|
[51ed002] | 36 | |
---|
| 37 | #include <bsp.h> |
---|
| 38 | |
---|
| 39 | /* |
---|
| 40 | * Define RTEMS_SET_ETHERNET_ADDRESS if you want to specify the |
---|
| 41 | * Ethernet address here. If RTEMS_SET_ETHERNET_ADDRESS is not |
---|
| 42 | * defined the driver will choose an address. |
---|
| 43 | */ |
---|
| 44 | //#define RTEMS_SET_ETHERNET_ADDRESS |
---|
| 45 | #ifdef RTEMS_SET_ETHERNET_ADDRESS |
---|
| 46 | #undef RTEMS_SET_ETHERNET_ADDRESS |
---|
| 47 | #endif |
---|
| 48 | |
---|
| 49 | #if (defined (RTEMS_SET_ETHERNET_ADDRESS)) |
---|
| 50 | /* static char ethernet_address[6] = { 0x08, 0x00, 0x3e, 0x12, 0x28, 0xb1 }; */ |
---|
| 51 | static char ethernet_address[6] = { 0x00, 0x80, 0x7F, 0x22, 0x61, 0x77 }; |
---|
| 52 | #endif |
---|
| 53 | |
---|
| 54 | #ifdef RTEMS_USE_LOOPBACK |
---|
| 55 | /* |
---|
| 56 | * Loopback interface |
---|
| 57 | */ |
---|
| 58 | extern void rtems_bsdnet_loopattach(); |
---|
| 59 | static struct rtems_bsdnet_ifconfig loopback_config = { |
---|
| 60 | "lo0", /* name */ |
---|
| 61 | rtems_bsdnet_loopattach, /* attach function */ |
---|
| 62 | |
---|
| 63 | NULL, /* link to next interface */ |
---|
| 64 | |
---|
| 65 | "127.0.0.1", /* IP address */ |
---|
| 66 | "255.0.0.0", /* IP net mask */ |
---|
| 67 | }; |
---|
| 68 | #endif |
---|
| 69 | |
---|
| 70 | /* |
---|
| 71 | * Default network interface |
---|
| 72 | */ |
---|
| 73 | static struct rtems_bsdnet_ifconfig netdriver_config = { |
---|
| 74 | RTEMS_BSP_NETWORK_DRIVER_NAME, /* name */ |
---|
| 75 | RTEMS_BSP_NETWORK_DRIVER_ATTACH, /* attach function */ |
---|
| 76 | |
---|
| 77 | #ifdef RTEMS_USE_LOOPBACK |
---|
| 78 | &loopback_config, /* link to next interface */ |
---|
| 79 | #else |
---|
| 80 | NULL, /* No more interfaces */ |
---|
| 81 | #endif |
---|
| 82 | |
---|
| 83 | #if (defined (RTEMS_USE_BOOTP)) |
---|
| 84 | NULL, /* BOOTP supplies IP address */ |
---|
| 85 | NULL, /* BOOTP supplies IP net mask */ |
---|
| 86 | #else |
---|
| 87 | "10.0.2.5", /* IP address */ |
---|
| 88 | "255.255.255.0", /* IP net mask */ |
---|
| 89 | #endif /* !RTEMS_USE_BOOTP */ |
---|
| 90 | |
---|
| 91 | #if (defined (RTEMS_SET_ETHERNET_ADDRESS)) |
---|
| 92 | ethernet_address, /* Ethernet hardware address */ |
---|
| 93 | #else |
---|
| 94 | NULL, /* Driver supplies hardware address */ |
---|
| 95 | #endif |
---|
| 96 | 0, /* Use default driver parameters */ |
---|
| 97 | 0, /* mtu */ |
---|
| 98 | 0, /* rbuf_count */ |
---|
| 99 | 0, /* xbuf_count */ |
---|
| 100 | 0, /* port */ |
---|
| 101 | 9 /* irq */ |
---|
| 102 | }; |
---|
| 103 | |
---|
| 104 | /* |
---|
| 105 | * Network configuration |
---|
| 106 | */ |
---|
| 107 | struct rtems_bsdnet_config rtems_bsdnet_config = { |
---|
| 108 | &netdriver_config, |
---|
| 109 | |
---|
| 110 | #if (defined (RTEMS_USE_BOOTP)) |
---|
| 111 | rtems_bsdnet_do_bootp, |
---|
| 112 | #else |
---|
| 113 | NULL, |
---|
| 114 | #endif |
---|
| 115 | |
---|
| 116 | 0, /* Default network task priority */ |
---|
| 117 | 256 * 1024, /* Default mbuf capacity */ |
---|
| 118 | 256 * 1024, /* Default mbuf cluster capacity */ |
---|
| 119 | |
---|
| 120 | #if (!defined (RTEMS_USE_BOOTP)) |
---|
| 121 | "rtems", /* Host name */ |
---|
| 122 | "", /* Domain name */ |
---|
| 123 | "10.0.2.1", /* Gateway */ |
---|
| 124 | "10.0.0.1", /* Log host */ |
---|
| 125 | {"10.0.2.3" }, /* Name server(s) */ |
---|
| 126 | {"" }, /* NTP server(s) */ |
---|
| 127 | |
---|
| 128 | #endif /* !RTEMS_USE_BOOTP */ |
---|
| 129 | |
---|
| 130 | }; |
---|
| 131 | |
---|
| 132 | /* |
---|
| 133 | * For TFTP test application |
---|
| 134 | */ |
---|
| 135 | #if (defined (RTEMS_USE_BOOTP)) |
---|
| 136 | #define RTEMS_TFTP_TEST_HOST_NAME "BOOTP_HOST" |
---|
| 137 | #define RTEMS_TFTP_TEST_FILE_NAME "BOOTP_FILE" |
---|
| 138 | #else |
---|
| 139 | #define RTEMS_TFTP_TEST_HOST_NAME "XXX.YYY.ZZZ.XYZ" |
---|
| 140 | #define RTEMS_TFTP_TEST_FILE_NAME "tftptest" |
---|
| 141 | #endif |
---|
| 142 | |
---|
| 143 | /* |
---|
| 144 | * For NFS test application |
---|
| 145 | * |
---|
| 146 | * NFS mount and a directory to ls once mounted |
---|
| 147 | */ |
---|
| 148 | #define RTEMS_NFS_SERVER "192.168.1.210" |
---|
| 149 | #define RTEMS_NFS_SERVER_PATH "/home" |
---|
| 150 | #define RTEMS_NFS_LS_PATH "/mnt/nfstest" |
---|
| 151 | |
---|
| 152 | #endif /* _RTEMS_NETWORKCONFIG_H_ */ |
---|