4.11network-demos-4-10-branchnetwork-demos-4-6-branchnetwork-demos-4-7-branchnetwork-demos-4-8-branchnetwork-demos-4-9-branch
Line | |
---|
1 | # |
---|
2 | # $Id$ |
---|
3 | # |
---|
4 | |
---|
5 | A simple application to test some of the KA9Q networking code. |
---|
6 | |
---|
7 | ************************** |
---|
8 | * NOTES * |
---|
9 | ************************** |
---|
10 | |
---|
11 | 1. Make sure you change the definition of MY_ETHERNET_ADDRESS in init.c |
---|
12 | before you try to use this program. |
---|
13 | |
---|
14 | 2. If you do not use BOOTP (i.e. the `#define USE_BOOTP 1' in init.c is |
---|
15 | removed), make sure you change the definition of MY_INTERNET_ADDRESS |
---|
16 | before you try to use the program. |
---|
17 | |
---|
18 | FAILURE TO FOLLOW THE ABOVE INSTRUCTIONS MAY PROVOKE YOUR NETWORK |
---|
19 | ADMINISTRATOR TO THE POINT WHERE VICIOUS ATTACKS WILL BE MADE UPON YOU. |
---|
20 | |
---|
21 | 3. Once this program is running on the target machine, you can test |
---|
22 | the network code by: |
---|
23 | a) Typing commands at the target console: |
---|
24 | s - show network statistics |
---|
25 | t - transmit TCP packets |
---|
26 | u - transmit UDP packets |
---|
27 | b) Run `telnet target_machine 24742' on another machines. |
---|
28 | Everything you type should be echoed back and noted on |
---|
29 | the target console. |
---|
30 | You can run more than one telnet session at once. |
---|
31 | You can use port number 24743 as well. |
---|
32 | |
---|
Note: See
TracBrowser
for help on using the repository browser.