4.11netdemos-4-5-branchnetwork-demos-4-10-branchnetwork-demos-4-6-branchnetwork-demos-4-7-branchnetwork-demos-4-8-branchnetwork-demos-4-9-branchrtems-4-5-branch
Rev | Line | |
---|
[481950e] | 1 | # |
---|
| 2 | # $Id$ |
---|
| 3 | # |
---|
| 4 | |
---|
[c87143a] | 5 | A simple application to test some of the KA9Q networking code. |
---|
| 6 | |
---|
| 7 | ************************** |
---|
| 8 | * NOTES * |
---|
| 9 | ************************** |
---|
| 10 | |
---|
| 11 | 1. Make sure you change the definition of MY_ETHERNET_ADDRESS in init.c |
---|
| 12 | before you try to use this program. |
---|
| 13 | |
---|
| 14 | 2. If you do not use BOOTP (i.e. the `#define USE_BOOTP 1' in init.c is |
---|
| 15 | removed), make sure you change the definition of MY_INTERNET_ADDRESS |
---|
| 16 | before you try to use the program. |
---|
| 17 | |
---|
| 18 | FAILURE TO FOLLOW THE ABOVE INSTRUCTIONS MAY PROVOKE YOUR NETWORK |
---|
| 19 | ADMINISTRATOR TO THE POINT WHERE VICIOUS ATTACKS WILL BE MADE UPON YOU. |
---|
| 20 | |
---|
| 21 | 3. Once this program is running on the target machine, you can test |
---|
| 22 | the network code by: |
---|
| 23 | a) Typing commands at the target console: |
---|
| 24 | s - show network statistics |
---|
| 25 | t - transmit TCP packets |
---|
| 26 | u - transmit UDP packets |
---|
| 27 | b) Run `telnet target_machine 24742' on another machines. |
---|
| 28 | Everything you type should be echoed back and noted on |
---|
| 29 | the target console. |
---|
| 30 | You can run more than one telnet session at once. |
---|
| 31 | You can use port number 24743 as well. |
---|
[481950e] | 32 | |
---|
Note: See
TracBrowser
for help on using the repository browser.