source: multiio/pcmmio/original/ChangeLog @ f89686d

Last change on this file since f89686d was f89686d, checked in by Joel Sherrill <joel.sherrill@…>, on Jul 22, 2009 at 6:24:22 PM

2009-07-22 Joel Sherrill <joel.sherrill@…>

  • README, main_pcmmio_dac.c, rtems_config.c: Add mode to pcmmio_dac command where it can write a pattern.
  • Property mode set to 100644
File size: 4.2 KB
Line 
12009-07-22      Joel Sherrill <joel.sherrill@oarcorp.com>
2
3        * README, main_pcmmio_dac.c, rtems_config.c: Add mode to pcmmio_dac
4        command where it can write a pattern.
5
62009-07-22      Joel Sherrill <joel.sherrill@oarcorp.com>
7
8        * README, main_pcmmio_adc.c, main_pcmmio_dac.c, main_pcmmio_din.c,
9        main_pcmmio_dout.c, pcmmio_commands.h: Switch to rtems/string2.h
10        methods. Verify negative voltages are allowed as input.
11
122009-07-21      Joel Sherrill <joel.sherrill@oarcorp.com>
13
14        * Makefile, README, main_pcmmio_dac.c, main_pcmmio_dout.c: Added
15        string2XXX routines to RTEMS so we have ability to do heavy error
16        checking on numeric inputs.
17
182009-07-21      Joel Sherrill <joel.sherrill@oarcorp.com>
19
20        * Makefile, README, mio_io.h, pcmmio_commands.h: Add pcmmio_dac
21        command.
22        * main_pcmmio_dac.c: New file.
23
242009-07-20      Joel Sherrill <joel.sherrill@oarcorp.com>
25
26        * Makefile, README, main_pcmmio_din.c, main_pcmmio_dout.c,
27        pcmmio_commands.h: Add initial command to monitor analog inputs.
28        Clean up help and usage.
29        * main_pcmmio_adc.c: New file.
30
312009-07-20      Joel Sherrill <joel.sherrill@oarcorp.com>
32
33        * README: Add description of commands.
34        * main_pcmmio_din.c, main_pcmmio_dout.c: Fix usage.
35
362009-07-20      Joel Sherrill <joel.sherrill@oarcorp.com>
37
38        * Makefile, main_pcmmio_din.c, pcmmio_commands.h, pcmmio_shell.c: Add
39        dout command.
40        * main_pcmmio_dout.c: New file.
41
422009-07-20      Joel Sherrill <joel.sherrill@oarcorp.com>
43
44        * Makefile: Put each command in its own file.
45        * main_pcmmio_din.c: New file.
46        * pcmmio_commands.c: Removed.
47
482009-07-20      Joel Sherrill <joel.sherrill@oarcorp.com>
49
50        * pcmmio_commands.c: Clean up command.
51
522009-07-17      Joel Sherrill <joel.sherrill@oarcorp.com>
53
54        * Makefile: Add dependencies so .exe's are relinked.
55        * mio_io.c: Typo.
56        * pcmmio_commands.c: Basic shell of command works.
57
582009-07-17      Joel Sherrill <joel.sherrill@oarcorp.com>
59
60        * Makefile: Shell appplication configured with a dummy pcmmio command.
61        * pcmmio_commands.c, pcmmio_commands.h, pcmmio_shell.c: New files.
62
632009-07-16      Joel Sherrill <joel.sherrill@oarcorp.com>
64
65        * Makefile, rtems_config.c: Simple RTEMS Application runs polled. Does
66        not report errors and reports all zeroes on input discretes.
67
682009-07-10      Joel Sherrill <joel.sherrill@oarcorp.com>
69
70        * rtems_config.c: Bump POSIX threads.
71
722009-06-17      Joel Sherrill <joel.sherrill@oarcorp.com>
73
74        * Status: New file.
75
762009-06-17      Joel Sherrill <joel.sherrill@oarcorp.com>
77
78        * buffered.c, dacbuff.c, dacout.c, flash.c, getall.c, getvolt.c,
79        kbhit.c, mio_io.c, mio_io_linux.c, mio_io_rtems.c, pcmmio.c, poll.c,
80        repeat.c, rtems_config.c: Clean up. Worked on RTEMS IRQ support code.
81
822009-06-10      Joel Sherrill <joel.sherrill@oarcorp.com>
83
84        * mio_io.h, mio_io_rtems.c: Add timestamps to buffered interrupts.
85        * rtems_config.c: Switch to POSIX Initialization thread and up
86        configured pthreads so application can create one.
87
882009-06-10      Joel Sherrill <joel.sherrill@oarcorp.com>
89
90        * rtems_config.c: Needs 4 barriers.
91
922009-06-10      Joel Sherrill <joel.sherrill@oarcorp.com>
93
94        * README: Document state of the driver.
95        * mio_io.h, mio_io_rtems.c: Move to shared interrupts when possible.
96        * rtems_config.c: Implement the RTEMS configuration and initialization.
97
982009-06-10      Joel Sherrill <joel.sherrill@oarcorp.com>
99
100        * mio_io_rtems.c: Initial interrupt support added. Should now be on
101        functional parity with Linux driver but not debugged.
102
1032009-06-10      Joel Sherrill <joel.sherrill@oarcorp.com>
104
105        * mio_io_rtems.c: All Linux functionality should be implemented now
106        EXCEPT hooking the interrupt.
107
1082009-06-10      Joel Sherrill <joel.sherrill@oarcorp.com>
109
110        * mio_io_rtems.c: Add checking for interrupt status.
111
1122009-06-08      Joel Sherrill <joel.sherrill@oarcorp.com>
113
114        * Makefile, flash.c, mio_io.h: All programs now compile with the copied
115        RTEMS specific porting layer file.
116        * .cvsignore, mio_io_rtems.c: New files.
117
1182009-06-08      Joel Sherrill <joel.sherrill@oarcorp.com>
119
120        * Makefile, mio_io.c, mio_io.h: Linux code split to porting file.
121        * mio_io_linux.c: New file.
122
1232009-06-08      Joel Sherrill <joel.sherrill@oarcorp.com>
124
125        * Makefile, kbhit.c, mio_io.c, mio_io.h: First successful compilation
126        under RTEMS. Added some Linux ifdef's.
127        * rtems_config.c: New file.
128
1292009-06-08      Joel Sherrill <joel.sherrill@oarcorp.com>
130
131        * ChangeLog, Makefile.linux, README: New files.
132
Note: See TracBrowser for help on using the repository browser.