Timeline
09/27/16:
- 16:29 Ticket #2792 (possible RFS deadlock) created by raduma
- Hello, I'm hitting a deadlock in our RTEMS 4.10 based system, in what …
- 11:13 Ticket #2791 (C++11 std::exception_ptr support) created by Sebastian Huber
- The C++11 std::exception_ptr support needs GCC changes for targets not …
09/25/16:
09/24/16:
- 22:15 Developer/Simulators/QEMU edited by Pavel Pisa
- Document QEMU setup with PCI NIC networking (diff)
09/23/16:
- 05:41 Ticket #2790 (Linker sets broken with GCC 7) created by Sebastian Huber
- See also: https://gcc.gnu.org/ml/gcc/2016-09/msg00114.html The …
- 05:16 OpenMP edited by Sebastian Huber
- (diff)
- 05:05 Ticket #2789 (C/C++ compatibility issue with empy CPU_Per_CPU_control) closed by Sebastian Huber <sebastian.huber@…>
- fixed: In [changeset:"75a6584a43a9ab4170376d31fe4041bbaaa7f547/rtems"]: […]
- 05:00 Ticket #2789 (C/C++ compatibility issue with empy CPU_Per_CPU_control) created by Sebastian Huber
09/22/16:
- 23:02 TBR/BSP/Tms570 edited by Pavel Pisa
- (diff)
- 22:53 TBR/BSP/Tms570 edited by Pavel Pisa
- (diff)
- 22:45 TBR/BSP/Tms570 edited by Pavel Pisa
- Update a little TMS570 BSP page (diff)
- 22:09 TBR/Website/Board_Support_Packages edited by Pavel Pisa
- Move TMS570 to the supported BSPs list. (diff)
- 11:53 OpenMP edited by Sebastian Huber
- (diff)
09/21/16:
- 22:38 Ticket #2788 (RTEMS I2C API only defines Standard-mode (Sm) speed as a default.) closed by Chris Johns
- wontfix: Replying to sebastian.huber: > Ok, the set clock IO control is not part of the Linux user-space API. You can set it via the RTEMS specific I2C_BUS_SET_CLOCK IO control. > I did not pick up this interface to control the clock speed. This approach fits with the Xilinx AXI I2C controller where the bus speed is best handled by the IP integrator placing the IP into the FPGA. There is no point having software control the clock speed, the FPGA needs to do this. In this case setting the clock speed will fail, which is the default. Thanks.
- 20:29 SOCIS/2016 edited by Saeed Ehteshamifar
- (diff)
- 19:56 RTEMSMailingLists edited by Gedare Bloom
- (diff)
- 00:54 Ticket #2788 (RTEMS I2C API only defines Standard-mode (Sm) speed as a default.) created by Chris Johns
- The RTEMS I2C API as defined in cpukit/dev/include/dev/i2c/i2c.h only …
09/20/16:
09/19/16:
- 08:05 Ticket #2786 (Remove the devfs in favor of a stripped down IMFS configuration) created by Sebastian Huber
- The IMFS offers the ability to register generic nodes for device …
09/16/16:
09/15/16:
- 08:47 Ticket #2785 (Ioctl extension for termios) created by Alexander Krutwig
- The termios driver shall be extended that I/O control commands can be …
09/14/16:
- 22:06 SOCIS/2016 edited by Saeed Ehteshamifar
- (diff)
- 21:57 SOCIS/2016 edited by Saeed Ehteshamifar
- (diff)
09/13/16:
- 23:37 Ticket #2659 (CONFIGURE_MALLOC_DIRTY documentation missing) closed by Joel Sherrill
- wontfix: Texinfo documentation is being replaced with Rest formatted documentation. 4.10 documentation is not buildable with newer texinfo versions. Addressing all warnings and errors would be too time-consuming. If interested, volunteer or consider sponsoring a developer to do it.
- 23:36 Ticket #2465 (Update Hello World Instructions to include MSYS2) closed by Joel Sherrill
- wontfix
- 23:36 Ticket #2409 (URL Paths in Getting Started point to rtems.com) closed by Joel Sherrill
- wontfix
Note: See TracTimeline
for information about the timeline view.